In the area of coated abrasives a hole pattern describes the arrangement of the suction holes embedded in the corresponding disc or strip.

The service life of abrasives is extended significantly if furnished with suction holes and used on the appropriate machine including exhaust system.

The type of hole pattern needed for a particular application always varies with the machine used. For more help finding the the right hole pattern for your machine, please contact us.

Discs

	GLS 1 ø 150mm 8 holes ø 10mm on hole circle ø 120mm + 1 centre hole ø 17mm
	GLS 2 ø 150mm 8 holes ø 10mm on hole circle ø 65mm
	GLS 3 ø 150mm 6 holes ø 10mm on hole circle ø 80mm
	GLS 4 ø 115mm 8 holes ø 10mm on hole circle ø 65mm
	GLS 5 ø 125mm 8 holes ø 10mm on hole circle ø 65mm
	GLS 15 Triangular ø 96mm 6 holes ø 8mm on hole circle ø 52mm
	GLS 24 98 x 148mm 7 holes ø 10mm
	GLS 27 ø 125mm 8 holes ø 10mm on hole circle ø 90mm + 1 centre hole ø 10mm
	GLS 47 ø 150mm 8 holes ø 9mm on hole circle ø 120mm 6 holes ø 9mm on hole circle ø 80mm + 1 centre hole ø 17mm
	GLS 51 ø 150mm 8 holes ø 10mm on hole circle ø 120mm 8 holes ø 8mm on hole circle ø 65mm + 1 centre hole ø 10mm
	GLS 52 ø 225mm 10 holes ø 12mm on hole circle ø 105mm
	GLS 74 ø 150 mm 8 Holes ø 9,5 mm on Hole circle ø 119 mm 16 Holes ø 6 mm on Hole circle ø 119 mm 8 Holes ø 7 mm on Hole circle ø 95 mm 8 Holes ø 8,5 mm on Hole circles ø 65 mm 8 Holes ø 6 mm on Hole circles ø 39 mm + 1 Centre hole ø 10 mm

Strips

	GL 1 115 × 280 mm 10 holes ø 10 mm
	GL 3 93 × 230 mm 8 holes ø 10 mm
	GL 9 93 × 230 mm 8 holes ø 10 mm
	GL 11 115 × 280 mm 14 holes ø 10 mm
	GL 13 115 × 280 mm 8 holes ø 10 mm
	GL 15 115 × 230 mm 10 holes ø 10 mm
	GL 17 93 × 180 mm 8 holes ø 10 mm
	GL 18 80 × 133 mm 8 holes ø 10 mm

Hole pattern for fibre discs

	10 = round hole
	30 = star shaped hole
Additional special cutting shapes are available on request. Please ask us!